
D-Link DCH-S161
Wi-Fi Water Sensor
Overview:
Protect Your Home
The DCH-S161 Wi-Fi Water Sensor is a wireless sensor that helps keep your home safe. You can install the probe anywhere and it will help you detect water leaks before it turns into serious damage. If the water sensor is triggered, a 90 dB alarm will sound and an LED will blink to give you audio and visual warnings. Push notifications to your mobile device let you keep tabs on your home on the go. You can also receive audio alerts from your Google Assistant so that you can know about a water leak even if you are too far away to hear the alarm on the water sensor.
Easy to Set Up
The DCH-S161 can be set up easily via the free mydlinkTM app4 . Simply download and install the app on your mobile device and follow the step-by-step instructions to quickly configure the sensor. The DCH-S161 connects to your existing Wi-Fi router, no hub required. In addition, you can configure policies to trigger other connected home devices whenever the DCH-S161 detects water.
Specially Designed Detection Cable
The water detection sensor supplied with the DCH-S161 is designed specifically to detect water on contact. When water is detected, the sensor will trigger both an alarm siren and an alarm LED so you can both hear and see the warning. The sensor is at the end of a 1.8 m (5.9 ft) cable, allowing you to place the sensor anywhere that’s convenient.
Access Anywhere Using the Mobile App
When water is detected the mydlinkTM app sends push notifications to your mobile device no matter where you are. With push notifications, you can rest assured that you are always aware of any problems so you can act fast.
Features:
- Compatible with the Google Assistant and IFTTT
- Get audio alerts from your Google Assistant
- 90 decibel siren
- Wireless 802.11n/g compatibility
- WPA/WPA2 wireless encryption
- mydlinkTM app integration
- Firmware Over The Air (FOTA)
- Low battery notification
- 1.8 m (5.9 ft) cable for water detector
Technical Specifications:
D-Link DCH-S161 Specifications | |
---|---|
General | |
Device Interfaces | 802.11n/g wireless Action button Reset button |
LED | Status |
Standards | IEEE 802.11n IEEE 802.11g |
Wireless Frequency Range | 2.4 GHz to 2.4835 GHzw |
Water Sensor Probe | 1.8 m (5.9 ft) |
Antennas | 1 x internal antenna |
Alarm Volume | 90 dB |
Functionality | |
Wireless Encryption | Wi-Fi Protected Access (WPA/WPA2) |
Supported Features | Google Assistant Push notifications IFTTT |
Device Management | mydlinkTM app |
Physical | |
Dimensions | 68 x 68 x 31 mm (2.68 x 2.68 x 1.22 in) |
Weight | Device: 60 g ± 5 g (2.12 oz ± 0.18 oz) Probe: 17 g ± 5 g (0.60 oz ± 0.18 oz) |
Power | 2 x AA batteries |
Temperature | Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 65 °C (-4 to 149 °F) |
Humidity (main unit) | Operating: 10% to 90% non-condensing Storage: 5% to 95% non-condensing |
Certifications | FCC IC CE |
Product Views:
![]() |
![]() |
D-Link DCH-S161 Front View | D-Link DCH-S161 Back View |
![]() |
![]() |
D-Link DCH-S161 Angle Left View | D-Link DCH-S161 Angle Right View |
Documentation:
Download the D-Link DCH-S161 Datasheet (PDF).