D-Link DGS-1250-28XMP-6KV
24-Port 10-Gigabit Smart Managed PoE Switch with 4 Ports 10G SFP+
List Price:
Our Price: $729.59
Click here to jump to more pricing!
Overview:
Cost-efficient SMB/SME access & aggregation solution
The D-Link DGS-1250 Series Smart Managed Switches are the latest generation of switches to provide increased Power over Ethernet (PoE) output, high port density, multiple management interfaces, and advanced Layer 2 features. With all of these features combined, the DGS-1250 Series provides a cost-efficient and flexible solution for expanding any business network.
Seamless Integration
The DGS-1250 Series includes a wide range of port and media types. All models in the DGS-1250 Series feature four 10G SFP+ ports, allowing you to choose the most suitable media type for your requirements. All DGS-1250 Series PoE switches include support for IEEE 802.3af/at and higher power budgets, allowing more PoE devices to be powered by the switch and for devices to be installed in remote locations without immediate access to power outlets. Furthermore, the DGS-1250-28XMP and DGS-1250-52XMP can supply PoE power up to 370 W providing even more power for connected devices.
Advanced Features
The DGS-1250 Series comes equipped with a complete lineup of L2 features, including IGMP snooping, port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers. The DGS-1250 Series also supports advanced features such as static routing, which allow network administrators to divide the network into VLANs, increasing network efficiency. Network maintenance features include loopback detection and cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting and shutting down switching loops. The cable diagnostics feature, designed primarily for administrators and customer service representatives, determines the cable quality and quickly discovers errors, allowing for swift diagnostics and maintenance.
Surveillance Mode
The DGS-1250 Series supports Auto Voice VLAN and Surveillance Mode, which allows voice and video traffic to be automatically identified and handled differently than regular network traffic. Auto Voice VLAN detects Voice over IP (VoIP) traffic and automatically segments it from the rest of the network, adding a layer of isolation and allowing Quality of Service (QoS) to be applied. Surveillance Mode detects compatible ONVIF cameras and places them in a surveillance VLAN, allowing a single switch to be used for voice, video, and data, removing the need for dedicated hardware and reducing maintenance costs. Surveillance Mode also includes its own Web UI, making surveillance features easily accessible and simplifying management of your surveillance network.
Advanced Access Control
D-Link’s innovative Safeguard Engine helps to protect the switches against traffic flooding caused by malicious attacks. The DGS-1250 Series supports 802.1X port-based authentication, allowing clients to be authenticated through external RADIUS servers. The Access Control List (ACL) feature helps to enhance network security and helps to protect the internal IT network. The DGS-1250 Series also features Address Resolution Protocol (ARP) spoofing prevention, which helps to provide protection from attacks on the network that could allow an intruder to sniff data frames, modify traffic, or bring traffic to a halt altogether by sending fake ARP messages. To help prevent ARP spoofing attacks, the switch uses packet control ACLs to block invalid packets that contain fake ARP messages. The DHCP server screening filters DHCP replies on unauthorized ports to prevent them from being assigned an IP address.
Versatile Management
The DGS-1250 Series comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant utility furthermore allows customers to easily discover multiple D-Link Smart Managed Switches within the same L2 network segment and display them onscreen for instant access. With this utility, users do not need to change the IP address of their PC. This allows for simultaneous configuration and setup of all discovered devices, including password changes and firmware upgrades. The DGS-1250 Series supports Command Line Interface (CLI) through console port. SNMP is also supported which allows for the central management of network assets, remote configuration, and logging functions.
6kV Surge Protection
The DGS-1250 Series switches feature built-in 6kV surge protection on all PoE and non-PoE Ethernet access ports. This helps protect the switches against sudden electrical surges such as lightning strikes or unstable electrical current. Built-in 6kV surge protection helps reduce the chances of equipment being damaged from electrical surges, and effectively lowers maintenance costs by minimizing the need for expensive equipment repairs or replacement.
Lifetime Warranty
D-Link offers a Lifetime Warranty and Next Business Day (NBD) hardware replacement for the DGS-1250 Series Smart Managed Switches to further its commitment to product quality and long-term customer confidence.
Features:
General
- 24 x 10/100/1000BASE-T Gigabit Ethernet PoE ports
- 4 x 10G SFP+ ports for high speed uplink connections
- Robust 370W PoE Power Budget
- Lite L3 Static Routing for increased network efficiency
- Advanced security features such as Access Control List, IMPB, and 802.1X Authentication enhance network security and help protect the network
- Dual Image & Dual Configuration for reduced downtime
- Supports STP/RSTP/MSTP for fault tolerance
- Full CLI for for easy management
- QoS for prioritization of critical network traffic
- 6kV Surge Protection on all Gigabit Ethernet access ports
- Lifetime Warranty includes NBD advance hardware replacement
Green Technology
- Link status detection
- Port and LED shut-off
- System hibernation
- Time-based PoE (PoE models only)
Security Features
- Access Control Lists (ACLs)
- D-Link Safeguard Engine helps the CPU resist broadcast/multicast/unicast flooding
- Port Security supports up to 64 MAC addresses per port
- ARP Spoofing Prevention
- IMPB Support
Intuitive Management
- D-Link Network Assistant (DNA) utility
- Multi-lingual Web UI
- Built-in SNMP MIB for remote NMS (D-View 7.0)
- Full command line support via console port
Advanced Features
- Static routing
- Surveillance Mode
- Auto Voice VLAN
- Dual software images
- Dual configuration files
- Embedded 6kV surge protection on all Gigabit Ethernet access ports
Technical Specifications:
| D-Link DGS-1250 Specificatins | ||||
|---|---|---|---|---|
| DGS-1250-28X-6KV | DGS-1250-28XMP-6KV | DGS-1250-52X-6KV | DGS-1250-52XMP-6KV | |
| General | ||||
| Number of Ports |
|
|
|
|
| Port Standard |
|
|||
| Network Cables | UTP Cat. 5, Cat. 5e (100 m max.) |
|||
| Duplex Mode |
|
|||
| Media Interface Exchange | Auto MDI/MDIX adjustment for all twisted-pair ports | |||
| Performance | ||||
| Switching Capacity | 128 Gbps | 128 Gbps | 176 Gbps | 176 Gbps |
| Transmission Method | Store-and-forward | Store-and-forward | Store-and-forward | Store-and-forward |
| MAC Address Table | 16K | 16K | 32K | 32K |
| Static MAC Addresses | 256 entries | 256 entries | 256 entries | 256 entries |
| Maximum 64 bytes packet forwarding rate | 95.24 Mpps | 95.24 Mpps | 130.95 Mpps | 130.95 Mpps |
| Packet Buffer Memory | 12 Mbits | 12 Mbits | 16 Mbits | 16 Mbits |
| CPU Memory | 2G DDR3 | 2G DDR3 | 2G DDR3 | 2G DDR3 |
| Flash Memory | 64 MB | 64 MB | 64 MB | 64 MB |
| PoE | ||||
| PoE Standard | - | IEEE 802.3af/at | - | IEEE 802.3af/at |
| PoE Capable Ports | - | 24 | - | 48 |
| PoE Power Budget | - | 370 W 30 W per port |
- | 370 W 30 W per port |
| LEDs | ||||
| Power (per device) | Yes | Yes | Yes | Yes |
| Link/Active/Speed (per RJ-45 port) | Yes | Yes | Yes | Yes |
| Link/Active/Speed (per 10G SFP+ port) | Yes | Yes | Yes | Yes |
| Physical & Environmental | ||||
| AC Input | 100 to 240 V AC 50/60 Hz internal universal power supply | |||
| Maximum Power Consumption |
|
|
|
|
| Standy Power Consumption |
|
|
|
|
| Surge Protection | 6kV surge protection on all Ethernet access ports | |||
| Acoustics |
|
|
|
|
| Heat Dissipation |
|
|
|
|
| MTBF | 743,482.45 hours | 463,430.16 hours | 589,984.72 hours | 309,053.10 hours |
| Operating Temperature | 23 to 122 ˚F (-5 to 50 ˚C) | |||
| Storage Temperature | -4 to 158 ˚F (-20 to 70˚C) | |||
| Operating Humidity | 0% to 95% non-condensing | |||
| Storage Humidity | 0% to 95% non-condensing | |||
| Dimensions (W x D x H) | 440 x 140 x 44 mm (17.32 x 5.51 x 1.73 in) | 440 x 250 x 44 mm (17.32 x 9.84 x 1.73 in) | 440 x 210 x 44 mm (17.32 x 8.27 x 1.73 in) | 440 x 250 x 44 mm (17.32 x 9.84 x 1.73 in) |
| Weight | 1.75 kg (3.86 lbs) | 3.46 kg (7.63 lbs) | 3.01 kg (6.63 lbs) | 3.85 kg (8.49 lbs) |
| Certifications | ||||
| Safety | CB, UL, BSMI, CCC | |||
| EMI | CE Class A, VCCI Class A, FCC Class A, IC, BSMI | |||
Software Features
L2 Features
- MAC Address Table
- 16K entries
- 32K entries (DGS-1250-52X/52XMP only
- IGMP Snooping
- IGMP v1/v2/v3 Snooping
- Supports 256 IGMP groups
- Supports at least 64 static multicast addresses
- IGMP per VLAN
- Supports IGMP Snooping Querier
- Loopback Detection
- 802.3ad Link Aggregetion
- Supports maximum 8 groups per per device and 8 ports per group
- LLDP
- LLDP-MED
- Jumbo Frame
- Up to 12,000 bytes
- Spanning Tree Protocol
- 802.1D STP
- 802.1W RSTP
- 802.1s MSTP
- Flow Control
- 802.3x Flow Control
- HOL Blocking Prevention
- Port Mirroring
- One-to-One
- Many-to-One
- Supports Mirroring for Tx/Rx/Both
- Multicast Filtering
- Forwards all unregistered groups
- Filters all unregistered groups
- Configurable MDI/MDIX
- MLD snooping v1/v2 awareness (256 groups)
- PD-Alive
VLAN
- 802.1Q
- VLAN Group
- Max. 4094 static VLAN groups
- Configurable VID from 1 - 4094
- Management VLAN
- Auto Voice VLAN
- Max. 10 user defined OUI
- Max. 8 default OUI
- Auto Surveillance VLAN
QoS (Quality of Service)
- 802.1p Quality of Service
- 8 Queues per port
- Queue Handling
- Strict
- Weighted Round Robin (WRR)
- Bandwidth Control
- Port-based (ingress/egress, min granularity 10/100/1000 is 16 Kbps)
- QoS based on:
- 802.1p Priority Queues
- DSCP
- MAC address
- EtherType
- IP address
- Protocol type
- ToS
- IP preference
- IPv6 Traffic Class
- TCP/UDP port
L3 Features
- IP Interface
- Supports 4 interfaces
- IPv6 Neighbor Discovery (ND)
- Static routing
- 124 IPv4 static route entries
- 50 IPv6 static route entries
Access Control List
- Max. 50 access list
- Max. 768 rules shared by IPv4, MAC and IPv6
- Each rule can only be associated with a single port
- ACL based on
- 802.1p priority mask
- VID mask
- Source/destination MAC address mask
- EtherType mask
- IP address
- Source/destination IP address mask
- DSCP mask
- Protocol type mask
- TCP/UDP port number mask
- IPv6 address
- Source/destination IP address mask
- DSCP mask
- Protocol type mask
- TCP/UDP port number mask
- IPv6 traffic class mask
Security Features
- Broadcast/Multicast/Unicast Storm Control
- D-Link Safeguard Engine
- Traffic segmentation
- SSH v2
- TLS v.1.2
- DoS attack prevention
- 802.1X Port-based Access Control
- Port Security
- Supports up to 64 MAC addresses per port
- ARP Spoofing Prevention
- Max. 127 entries
- DHCP Server Screening
- IP-MAC-Port Binding (Smart Binding)
- ARP Inspection
- Max. 64 entries
- IPv4 Inspection
- Max. 127 entries
- IPv6 Inspection
- Max. 63 entries
- DHCP Snooping
- Max. 512 entries
- ARP Inspection
AAA
- 802.1X Authentication
- Supports local/RADIUS database
- Supports port-based access control
- Supports EAP, OTP, TLS, TTLS, PEAP
- IPv6 RADIUS Server
- Support MD5 authentication
- Max. 128 entries when using local database
OAM
- Cable Diagnostics
- Factory Reset
D-Link Green V3.0 Technology
- Power Saving by:
- Link Status
- Time-based PoE: PoE ports can be turned on/off by port or system through schedule
- System hibernation
- Port shut off
- Cable length detection
Management
- Web-based GUI
- D-Link Network Assistant Utility
- Full CLI
- Telnet Server
- TFTP Client
- Configurable MDI/MDIX
- SNMP
- Supports v1/v2c/v3
- SNMP Trap
- Backup/Upgrade firmware
- Smart Wizard
- Upload/Download Configuration file
- BootP/DHCP Client
- System Log
- Max. 500 log entries
- SNTP
- ICMP v6
- IPv4/v6 Dual Stack
- DHCP Auto Configuration
- Time Setting
- SNTP
- RMONv1
- Trusted Host
- Dual image
- Dual configuration
MIBs
- RFC1212 Concise MIB Definitions
- RFC1213 MIBII
- RFC1215 MIB Traps Convention
- RFC1493 Bridge MIB
- RFC1157, RFC2573, RFC2575, RFC2576 SNMP MIB
- RFC1442, RFC1901, RFC1902, RFC1903, RFC1904, RFC1905, RFC1906, RFC1907, RFC1908, RFC2578, RFC3418 SNMPv2 MIB
- RFC271, RFC1757, RFC2819 RMON MIB
- RFC2021 RMONv2 MIB
- RFC1398, RFC1643, RFC1650, RFC2358, RFC2665 Ether-like MIB
- RFC2674 802.1p MIB
- Interface Group MIB
- RFC2618 RADIUS Authentication Client MIB
- RFC4022 MIB for TCP
- RFC4113 MIB for UDP
- RFC2389 MIB for Diffserv.
- RFC2620 RADIUS Accounting Client MIB
- Private MIB
- PoE MIB
- DDP MIB
- LLDP-MED MIB
RFC Standards
- RFC791 IP
- RFC768 UDP
- RFC793 TCP
- RFC792 ICMPv4
- RFC2463, RFC4443 ICMPv6
- RFC826 ARP
- RFC1321, RFC2284, RFC2865, RFC2716, RFC3580 Extensible Authentication Protocol (EAP)
- RFC2573 SNMP Applications
- RFC2461, RFC4861 Neighbor Discovery for IPv6
- RFC2462, RFC4862 IPv6 Stateless Address Auto-configuration (SLAAC)
- RFC2464 IPv6 over Ethernet and definition
- RFC4291 IPv6 Addressing Architecture
- RFC2893, RFC4213 IPv4/IPv6 dual stack function
Documentation:
Download the D-Link DGS-1250 Series Switches Datasheet (PDF).
Pricing Notes:
- Pricing and product availability subject to change without notice.
List Price:
Our Price: $729.59