D-Link DES-1018MPV2
18-Port 10/100BASE-TX PoE Unmanaged Switch
Sorry, this product is no longer available, please contact us for a replacement.
Click here to jump to more pricing!
Overview:
Combining the convenience of PoE, optimized performance, reliability, and ease of use, the 18-Port Fast Ethernet PoE Switch with 2 Gigabit uplink ports is the ideal choice for adding PoE devices to a network.
PoE+ Support
16 ports provide up to 30W per port to even the most power-hungry devices
Surge protection
Protection from power surges and lightning
Far-Reaching Connectivity
Extended range of up to 250m
Plug and Play
Simple plug and play installation with auto-MDI/MDIX crossover on all ports
Multiple Port Modes
Isolated mode and Extend Mode
Energy Efficient Ethernet
Cut operating costs without sacrificing performance
All Your Home or Small Business Devices Under One Banner
The DES-1018MPV2 is specifically designed to facilitate easy connections and supply of power to devices such as access points (AP) or IP cameras and phones. But that’s not all, connect other Ethernet devices such as computers, printers and NASs to unify all your devices under one efficient network ready for any application.
Far-Reaching Connectivity
The DES-1018MPV2 features two operating modes: Isolation or Extended mode, each with their own use cases. If both modes are deactivated, ports offer 10/100 Mbps PoE connectivity as standard, with ports 1 to 8 prioritized to optimize the port cache.
Isolation Mode
Isolation mode prevents port-to-port communications, permitting ports 1-16 to communicate solely through uplink ports 17-18, where strengthened security measures are necessary.
Extended PoE Mode
Have a device more than 100m away? Extend mode facilitates long-range power delivery by enhancing ports 9 to 16 to supply power to devices up to 250m away.
Better For Your Budget, Better For The Planet
To help balance the budget, the DES-1018MPV2 supports IEEE 802.3az Energy Efficient Ethernet (EEE). This feature detects network activity, automatically putting unused ports to sleep and powering them on as required.
The smart fan also automatically adjusts itself to reduce power consumption and noise when possible, so businesses can reinvest savings back into their business.
Features:
Flexible Connection
- 16 10/100Mbps PoE ports
- 2 Gigabit Combo ports for different switch fabric
Easy Setup
- Plug-and-play installation
- Auto MDI/MDIX crossover for all ports
Adequate PoE Power Budget
- Supports IEEE 802.3af/at standard
- Each port supports up to 30 watts, with a total PoE budget of 247 watts
Long-Reach Connectivity
- Reach up to 250 m longer distances
- Limited to 10 Mbps speed on port 9-16
Security Port Isolation
- Effective method for uplink connection
- Constraint communication between port 1-16 and uplink ports
Technical Specifications:
| D-Link DES-1018MPV2 Specifications | |
|---|---|
| General | |
| Device Interfaces |
|
| Standards |
|
| LED |
|
| General | |
| Switching Capacity | 7.2 Gbps |
| Transmission Method | Store-and-forward |
| MAC Address Table | 16k |
| Packet Buffer | 512 Kbytes |
| Media Forwarding Rate | 5.35 Mpps |
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 247 watts |
| PoE Ports | Ports 1~16 up to 30 W per port |
| Physical | |
| Dimensions | 11” x 8.3” x 1.7” (280 mm x 230 mm x 44 mm) |
| Weight | 2 kg (4.41 lbs) |
| Power | Internal AC input: 100 ~ 240 VAC, 50~60 Hz |
| Power Consumption |
|
| Temperature |
|
| Humidity |
|
| MTBF | 467,815 hours |
| Heat Dissipation | 161.7 BTU/h |
| Certifications |
|
| Safety |
|
| Warranty Information | |
| Warranty | Limited Lifetime Warranty |
Documentation:
Download the D-Link DES-1018MPV2 Datasheet (PDF).
Pricing Notes:
- Pricing and product availability subject to change without notice.